The specific qualities of
ABS filament include high
temperature resistance and greater rigidity when printed at high
temperatures, characteristics that are reinforced when using a
nozzle of 0.6 or greater, for example
Nozzle MK8 -Filament 1.75 - 0.6mm (narrow) or
Nozzle for e3D - Filament 1.75mm - 0.6mm. During printing, the table must be heated to +/- 100ºC to prevent the piece from coming loose from the table.
An indisputable advantage is that ABS retains its properties when exposed to temperatures of up to -40 ° C.
Main Features:- high strength and rigidity while maintaining dimensional accuracy;
- matte outer surface;
- temperature resistance (+/-90ºC);
- low water absorption;
- Easy processing and post-treatment (grinding, drilling, sawing, sanding).
Applications:- manufacturing of all types of items subject to external temperature and exposure;
- possibility of mechanical treatments, allowing the production of parts for installations;
- end-use parts;
- industrial design;
- tools;
- custom components.
Packaging
The
filament is wound on a narrow spool measuring 20 cm in diameter and 8
cm thick. Each spool contains information about the material type,
diameter and recommended printing temperature. The filament is vacuum
packed with a silica bag.
Features:- Diameter: 1.75mm
- Tolerance: ±0.05mm
- Printing temperature (nozzle): 230º-255º
- Heated table (bed): 85 - 100ºC
- Total weight: +/- 1400g
Care to be taken
Any
ABS material can be toxic if heated to high temperatures. ABS is a
material that, in the event of temperature variation or air current, can
come off the printing bed or warp. During the printing process, you
must ensure that no people or animals remain in the area. It must not be
in contact with food.
Spool dimensions:
- d1 Spool outer diameter Ø: 200mm
- d3 Spool inner diameter Ø: 52mm
- L1 Spool width: 45mm
- Empty spool Weight: less than 200g
Note: The spool may look different from the one shown in the image due to the spool return campaign.
There are two versions: 3D printed spool and plastic injection. Both have similar dimensions.
Manufacturer: Reprap.pt
